diff --git a/run/config-testnet-standard.toml b/run/config-testnet-standard.toml new file mode 100644 index 0000000..6e2e97d --- /dev/null +++ b/run/config-testnet-standard.toml @@ -0,0 +1,247 @@ +# This is a TOML config file. +# For more information, see https://github.com/toml-lang/toml + +####################################################################### +### Network Config Options ### +####################################################################### + +# Data directory where node's keyfile is stored. +# network_dir = "network" + +# IP address to listen on. +# network_listen_address = "0.0.0.0" + +# The address to broadcast to peers about which address we are listening on. Generally, +# configure public IP address for UDP discovery. If not specified, program will try to +# detect public IP address automatically. +# network_enr_address = "" + +# The tcp port to broadcast to peers in order to reach back for libp2p services. +# network_enr_tcp_port = 1234 + +# The udp port to broadcast to peers in order to reach back for discovery. +# network_enr_udp_port = 1234 + +# The TCP port that libp2p listens on. +# network_libp2p_port = 1234 + +# UDP port that discovery listens on. +# network_discovery_port = 1234 + +# Target number of connected peers. +# network_target_peers = 50 + +# List of nodes to bootstrap UDP discovery. Note, `network_enr_address` should be +# configured as well to enable UDP discovery. +network_boot_nodes = ["/ip4/35.95.5.134/udp/1234/p2p/16Uiu2HAmFGrDV8wKToa1dd8uh6bz8bSY28n33iRP3pvfeBU6ysCw","/ip4/35.84.189.77/udp/1234/p2p/16Uiu2HAmF7t5iuRoWLMvQVfHbbJr5TFgHo2oU1CDxJm56eLdxRAY"] + +# List of libp2p nodes to initially connect to. +# network_libp2p_nodes = [] + +# Indicates if the user has set the network to be in private mode. Currently this +# prevents sending client identifying information over identify. +# network_private = false + +# Disables the discovery protocol from starting. +# network_disable_discovery = false + +####################################################################### +### UDP Discovery Config Options ### +####################################################################### +# The request timeout for each UDP request. +# discv5_request_timeout_secs = 5 + +# The timeout after which a `QueryPeer` in an ongoing query is marked unresponsive. +# Unresponsive peers don't count towards the parallelism limits for a query. +# Hence, we may potentially end up making more requests to good peers. +# discv5_query_peer_timeout_secs = 2 + +# The number of retries for each UDP request. +# discv5_request_retries = 1 + +# The number of peers to request in parallel in a single query. +# discv5_query_parallelism = 5 + +# Reports all discovered ENR's when traversing the DHT to the event stream. +# discv5_report_discovered_peers = false + +# Disables the incoming packet filter. +# discv5_disable_packet_filter = false + +# Disable to limit the number of IP addresses from the same +# /24 subnet in the kbuckets table. This is to mitigate eclipse attacks. +# discv5_disable_ip_limit = false + +####################################################################### +### Log Sync Config Options ### +####################################################################### + +# RPC endpoint to sync event logs on EVM compatible blockchain. +# blockchain_rpc_endpoint = "http://127.0.0.1:8545" + +# Flow contract address to sync event logs. +log_contract_address = "0x0460aA47b41a66694c0a73f667a1b795A5ED3556" + +# Block number to sync event logs from blockchain. Generally, this is +# the block number when flow contract deployed. +log_sync_start_block_number = 595059 + +# Number of blocks to confirm a transaction. +confirmation_block_count = 6 + +# Maximum number of event logs to poll at a time. +# log_page_size = 999 + +# Maximum data size to cache in memory (by default, 100MB). +# max_cache_data_size = 104857600 + +# TTL to cache data in memory. +# cache_tx_seq_ttl = 500 + +# The number of retries after a RPC request times out. +# rate_limit_retries = 100 + +# The nubmer of retries for rate limited responses. +# timeout_retries = 100 + +# The duration to wait before retry, in ms. +# initial_backoff = 500 + +# The duration between each paginated getLogs RPC call, in ms. +# This is set to avoid triggering the throttling mechanism in the RPC server. +# recover_query_delay = 50 + +# The counter assumed the finalized block behind the latest block. +# default_finalized_block_count = 100 + +# Remove finalized block trigger interval. +# remove_finalized_block_interval_minutes = 30 + +# Watch_loop (eth_getLogs) trigger interval. +# watch_loop_wait_time_ms = 500 + +####################################################################### +### RPC Config Options ### +####################################################################### + +# Whether to provide RPC service. +# rpc_enabled = true + +# HTTP server address to bind for public RPC. +# rpc_listen_address = "0.0.0.0:5678" + +# HTTP server address to bind for admin and debug RPC. +# rpc_listen_address_admin = "127.0.0.1:5679" + +# Maximum data size of RPC request body (by default, 100MB). +# max_request_body_size = 104857600 + +# Number of chunks for a single segment. +# rpc_chunks_per_segment = 1024 + +# Maximum file size that allowed to cache in memory (by default, 10MB). +# rpc_max_cache_file_size = 10485760 + +####################################################################### +### Chunk Pool Config Options ### +####################################################################### + +# Maximum number of threads to upload segments of a single file simultaneously. +# chunk_pool_write_window_size = 4 + +# Maximum data size of cached segment in pool (by default, 4MB). +# chunk_pool_max_cached_chunks_all = 4194304 + +# Maximum number of threads to upload segments for all files simultaneously. +# chunk_pool_max_writings = 16 + +# Expiration time to cache uploaded segments in memory. +# chunk_pool_expiration_time_secs = 300 + +####################################################################### +### DB Config Options ### +####################################################################### + +# Directory to store data. +# db_dir = "db" + +####################################################################### +### Misc Config Options ### +####################################################################### + +# Log configuration file. +# log_config_file = "log_config" + +# Log directory. +# log_directory = "log" + +####################################################################### +### Mine Config Options ### +####################################################################### + +# Mine contract address for incentive. +mine_contract_address = "0x1785c8683b3c527618eFfF78d876d9dCB4b70285" + +# Miner key is used to sign blockchain transaction for incentive. +# The value should be a hex string of length 64 without 0x prefix. +# +# Note, the corresponding address should have enough tokens to pay +# transaction gas fee. +# miner_key = "" + +####################################################################### +### Sharding Config Options ### +####################################################################### +# The max number of chunk entries to store in db. +# Each entry is 256B, so the db size is roughly limited to +# `256 * db_max_num_sectors` Bytes. +# If this limit is reached, the node will update its `shard_position` +# and store only half data. +# +db_max_num_sectors = 1000000000 + +# The format is /, where the shard number is 2^n. +# This only applies if there is no stored shard config in db. +# shard_position = "0/2" + +reward_contract_address = "0x0496D0817BD8519e0de4894Dc379D35c35275609" +# The time interval to check if we should half `shard_position` to prune data. +# +# prune_check_time_s = 60 + +# The number of chunk entries to delete in a batch when we prune data. +# +# prune_batch_size = 1024 + +# The time interval to wait between each prune batch deletion to avoid +# IO resource exhaustion. +# +# prune_batch_wait_time_ms = 1000 + +####################################################################### +### File Sync Config Options ### +####################################################################### +[sync] + +# Enable file sync among peers automatically. When enabled, each node will store +# all files, and sufficient disk space is required. +auto_sync_enabled = true + +# Maximum number of files in sync from other peers simultaneously. +# max_sync_files = 16 + +# Timeout to terminate a file sync when automatically sync from other peers. +# If timeout, terminated file sync will be triggered later. +# find_peer_timeout = "10s" + +# Enable to start a file sync via RPC (e.g. `admin_startSyncFile`). +# sync_file_by_rpc_enabled = true + +# Enable to start a file sync automatically when a file announcement P2P message received. +# sync_file_on_announcement_enabled = false + +# Maximum threads to sync files in sequence. +# max_sequential_workers = 8 + +# Maximum threads to sync files randomly. +# max_random_workers = 4