add mainnet turbo config

run/config-mainnet-turbo.toml

@@ -0,0 +1,358 @@
+# This is a TOML config file.
+# For more information, see https://github.com/toml-lang/toml
+
+#######################################################################
+###                     Network Config Options                      ###
+#######################################################################
+
+# Data directory where node's keyfile is stored.
+# network_dir = "network"
+
+# IP address to listen on.
+# network_listen_address = "0.0.0.0"
+
+# The address to broadcast to peers about which address we are listening on. Generally,
+# configure public IP address for UDP discovery. If not specified, program will try to
+# detect public IP address automatically.
+# network_enr_address = ""
+
+# The tcp port to broadcast to peers in order to reach back for libp2p services.
+# network_enr_tcp_port = 1234
+
+# The udp port to broadcast to peers in order to reach back for discovery.
+# network_enr_udp_port = 1234
+
+# The TCP port that libp2p listens on.
+# network_libp2p_port = 1234
+
+# UDP port that discovery listens on.
+# network_discovery_port = 1234
+
+# Target number of connected peers. can be 100
+# network_target_peers = 50
+
+# List of nodes to bootstrap UDP discovery. Note, `network_enr_address` should be
+# configured as well to enable UDP discovery.
+network_boot_nodes = ["/ip4/34.66.131.173/udp/1234/p2p/16Uiu2HAmG81UgZ1JJLx9T2HqELgJNP36ChHzYkCdA9HdxvAbb5jQ","/ip4/34.60.163.4/udp/1234/p2p/16Uiu2HAmL3DoA7e7mbxs7CkeCPtNrAcfJFFtLpJDr2HWuR6QwJ8k","/ip4/34.169.236.186/udp/1234/p2p/16Uiu2HAm489RdhEgZUFmNTR4jdLEE4HjrvwaPCkEpSYSgvqi1CbR","/ip4/34.71.110.60/udp/1234/p2p/16Uiu2HAmBfGfbLNRegcqihiuXhgSXWNpgiGm6EwW2SYexfPUNUHQ"]
+
+# List of libp2p nodes to initially connect to.
+# network_libp2p_nodes = []
+
+# Indicates if the user has set the network to be in private mode. Currently this
+# prevents sending client identifying information over identify.
+# network_private = false
+
+# Disables the discovery protocol from starting.
+# network_disable_discovery = false
+
+#######################################################################
+###                   UDP Discovery Config Options                  ###
+#######################################################################
+
+# The request timeout for each UDP request.
+# discv5_request_timeout_secs = 5
+
+# The timeout after which a `QueryPeer` in an ongoing query is marked unresponsive.
+# Unresponsive peers don't count towards the parallelism limits for a query.
+# Hence, we may potentially end up making more requests to good peers.
+# discv5_query_peer_timeout_secs = 2
+
+# The number of retries for each UDP request.
+# discv5_request_retries = 1
+
+# The number of peers to request in parallel in a single query.
+# discv5_query_parallelism = 5
+
+# Reports all discovered ENR's when traversing the DHT to the event stream.
+# discv5_report_discovered_peers = false
+
+# Disables the incoming packet filter.
+# discv5_disable_packet_filter = false
+
+# Disable to limit the number of IP addresses from the same
+# /24 subnet in the kbuckets table. This is to mitigate eclipse attacks.
+# discv5_disable_ip_limit = false
+
+#######################################################################
+###                     Log Sync Config Options                     ###
+#######################################################################
+
+# RPC endpoint to sync event logs on EVM compatible blockchain.
+# blockchain_rpc_endpoint = "http://127.0.0.1:8545"
+
+# Flow contract address to sync event logs.
+log_contract_address = "0x62D4144dB0F0a6fBBaeb6296c785C71B3D57C526"
+
+# Block number to sync event logs from blockchain. Generally, this is
+# the block number when flow contract deployed.
+log_sync_start_block_number = 2387557
+
+# Number of blocks to confirm a transaction.
+confirmation_block_count = 1
+
+# Maximum number of event logs to poll at a time.
+# log_page_size = 999
+
+# Maximum data size to cache in memory (by default, 100MB).
+# max_cache_data_size = 104857600
+
+# TTL to cache data in memory.
+# cache_tx_seq_ttl = 500
+
+# The number of retries after a RPC request times out.
+# rate_limit_retries = 100
+
+# The nubmer of retries for rate limited responses.
+# timeout_retries = 100
+
+# The duration to wait before retry, in ms.
+# initial_backoff = 500
+
+# The duration between each paginated getLogs RPC call, in ms.
+# This is set to avoid triggering the throttling mechanism in the RPC server.
+# recover_query_delay = 50
+
+# The counter assumed the finalized block behind the latest block.
+# default_finalized_block_count = 100
+
+# Remove finalized block trigger interval.
+# remove_finalized_block_interval_minutes = 30
+
+# Watch_loop (eth_getLogs) trigger interval.
+# watch_loop_wait_time_ms = 500
+
+#######################################################################
+###                     Chunk Pool Config Options                   ###
+#######################################################################
+
+# Maximum number of threads to upload segments of a single file simultaneously.
+# chunk_pool_write_window_size = 2
+
+# Maximum data size of cached segment in pool (by default, 4MB).
+# chunk_pool_max_cached_chunks_all = 4194304
+
+# Maximum number of threads to upload segments for all files simultaneously.
+# chunk_pool_max_writings = 64
+
+# Expiration time to cache uploaded segments in memory.
+# chunk_pool_expiration_time_secs = 300
+
+#######################################################################
+###                     DB Config Options                           ###
+#######################################################################
+
+# Directory to store data.
+# db_dir = "db"
+
+#######################################################################
+###                     Misc Config Options                         ###
+#######################################################################
+
+# Log configuration file.
+# log_config_file = "log_config"
+
+# Log directory.
+# log_directory = "log"
+
+#######################################################################
+###                     Mine Config Options                         ###
+#######################################################################
+
+# Mine contract address for incentive.
+mine_contract_address = "0xCd01c5Cd953971CE4C2c9bFb95610236a7F414fe"
+
+# Miner key is used to sign blockchain transaction for incentive.
+# The value should be a hex string of length 64 without 0x prefix.
+#
+# Note, the corresponding address should have enough tokens to pay
+# transaction gas fee.
+# miner_key = ""
+
+# Period for querying mine context on chain (in seconds)
+#
+# Note: During each query period, nodes will issue 3 `eth_call` requests. 
+# If your blockchain RPC endpoint is a public or priced node, please be 
+# cautious not to set the period too short.
+#
+# mine_context_query_seconds = 5
+
+# CPU Usage percentage for PoRA mining. 100 means one CPU core is fully loaded. 
+#
+# miner_cpu_percentage = 100
+
+#######################################################################
+###                   Sharding Config Options                       ###
+#######################################################################
+
+# The max number of chunk entries to store in db.
+# Each entry is 256B, so the db size is roughly limited to
+# `256 * db_max_num_sectors` Bytes.
+# If this limit is reached, the node will update its `shard_position`
+# and store only half data.
+#
+# db_max_num_sectors = 4000000000
+
+# The format is <shard_id>/<shard_number>, where the shard number is 2^n.
+# This only applies if there is no stored shard config in db.
+# shard_position = "0/1"
+
+reward_contract_address = "0x457aC76B58ffcDc118AABD6DbC63ff9072880870"
+
+# The time interval to check if we should half `shard_position` to prune data.
+#
+# prune_check_time_s = 60
+
+# The number of chunk entries to delete in a batch when we prune data.
+#
+# prune_batch_size = 1024
+
+# The time interval to wait between each prune batch deletion to avoid
+# IO resource exhaustion.
+#
+# prune_batch_wait_time_ms = 1000
+
+#######################################################################
+###                Network Peer DB Config Options                   ###
+#######################################################################
+
+[network_peer_db]
+
+# The maximum number of disconnected nodes to remember.
+max_disconnected_peers = 10000
+
+# The maximum number of banned nodes to remember.
+max_banned_peers = 10000
+
+#######################################################################
+###                   Router Config Options                         ###
+#######################################################################
+
+[router]
+
+# Timeout to publish file announcements in batch.
+# batcher_timeout = "1s"
+
+# Number of files in an announcement to publish in batch.
+batcher_file_capacity = 10
+
+# Number of announcements in a pubsub message to publish in batch.
+batcher_announcement_capacity = 100
+
+#######################################################################
+###                   File Sync Config Options                      ###
+#######################################################################
+
+[sync]
+
+# Enable file sync among peers automatically. When enabled, each node will store
+# all files, and sufficient disk space is required.
+auto_sync_enabled = true
+
+# Indicates whether to sync file from neighbor nodes only. This is to avoid flooding file
+# announcements in the whole network, which leads to high latency or even timeout to sync files.
+neighbors_only = true
+
+#  Maximum number of files in sync from other peers simultaneously. to watch, can increase
+# max_sync_files = 8
+
+# Enable to start a file sync via RPC (e.g. `admin_startSyncFile`).
+# sync_file_by_rpc_enabled = true
+
+# Maximum number of continous failures to terminate a file sync.
+# max_request_failures = 5
+
+# Timeout to dial peers.
+# peer_connect_timeout = "15s"
+
+# Timeout to disconnect peers.
+# peer_disconnect_timeout = "15s"
+
+# Timeout to find peers via FIND_FILE P2P pubsub message.
+# peer_find_timeout = "120s"
+
+# Timeout to download data from remote peer.
+# peer_chunks_download_timeout = "15s"
+
+# Maximum network bandwidth (B/s) to sync files. Default value is 0,
+# which indicates no limitation. TODO: 50 MBps
+# max_bandwidth_bytes = 50 * 1024 * 1024
+
+# Maximum threads to sync files in sequence.
+# max_sequential_workers = 0
+
+# Maximum threads to sync files randomly.
+# max_random_workers = 2
+
+# Timeout to terminate a file sync in sequence.
+# sequential_find_peer_timeout = "60s"
+
+# Timeout to terminate a file sync randomly.
+# random_find_peer_timeout = "500s"
+
+#######################################################################
+###                File Location Cache Options                      ###
+#######################################################################
+
+# [file_location_cache]
+
+# File location cache is a cache that maintains storage positions of files. 
+# Storage location information is represented by the IP address of the storage node and the timestamp indicating when the node declared that it stores the corresponding file.
+# It has both a global capacity limit and a limit on the capacity for location information of each individual file.
+# When the cache is full, the storage position information with oldest timestamp will be replaced.
+# Global cache capacity.
+# max_entries_total = 1000000
+
+# Location information capacity for each file.
+# max_entries_per_file = 4
+
+# Validity period of location information.
+# If the timestamp in the storage location information exceeds this duration from the current time, it will be removed from the cache.
+# entry_expiration_time_secs = 86400
+
+#######################################################################
+###                     RPC Config Options                          ###
+#######################################################################
+
+[rpc]
+
+# Whether to provide RPC service.
+# enabled = true
+
+# HTTP server address to bind for public RPC.
+# listen_address = "0.0.0.0:5678"
+
+# HTTP server address to bind for admin and debug RPC.
+# listen_address_admin = "0.0.0.0:5679"
+
+# Number of chunks for a single segment.
+# chunks_per_segment = 1024
+
+# Maximum data size of RPC request body (by default, 10MB).
+# max_request_body_size = 10485760
+
+# Maximum file size that allowed to cache in memory (by default, 10MB).
+# max_cache_file_size = 10485760
+
+#######################################################################
+###                      Metrics Options                            ###
+#######################################################################
+
+# [metrics]
+
+# Whether to enable metrics.
+# enabled = false
+
+# Interval to output metrics periodically, e.g. "10s", "30s" or "60s".
+# report_interval = "10s"
+
+# File name to output metrics periodically.
+# file_report_output = ""
+
+# Influxdb configurations to output metrics periodically.
+# influxdb_report_host = ""
+# influxdb_report_db = ""
+# influxdb_report_username = ""
+# influxdb_report_password = ""
+
+# Storage node name as a tag.
+# influxdb_report_node = ""