0g-storage-node/run/config-testnet-turbo.toml
2024-09-24 11:59:34 +08:00

350 lines
12 KiB
TOML

# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml
#######################################################################
### Network Config Options ###
#######################################################################
# Data directory where node's keyfile is stored.
# network_dir = "network"
# IP address to listen on.
# network_listen_address = "0.0.0.0"
# The address to broadcast to peers about which address we are listening on. Generally,
# configure public IP address for UDP discovery. If not specified, program will try to
# detect public IP address automatically.
# network_enr_address = ""
# The tcp port to broadcast to peers in order to reach back for libp2p services.
# network_enr_tcp_port = 1234
# The udp port to broadcast to peers in order to reach back for discovery.
# network_enr_udp_port = 1234
# The TCP port that libp2p listens on.
# network_libp2p_port = 1234
# UDP port that discovery listens on.
# network_discovery_port = 1234
# Target number of connected peers.
# network_target_peers = 50
# List of nodes to bootstrap UDP discovery. Note, `network_enr_address` should be
# configured as well to enable UDP discovery.
network_boot_nodes = ["/ip4/54.219.26.22/udp/1234/p2p/16Uiu2HAmTVDGNhkHD98zDnJxQWu3i1FL1aFYeh9wiQTNu4pDCgps","/ip4/52.52.127.117/udp/1234/p2p/16Uiu2HAkzRjxK2gorngB1Xq84qDrT4hSVznYDHj6BkbaE4SGx9oS","/ip4/8.154.47.100/udp/1234/p2p/16Uiu2HAm2k6ua2mGgvZ8rTMV8GhpW71aVzkQWy7D37TTDuLCpgmX"]
# List of libp2p nodes to initially connect to.
# network_libp2p_nodes = []
# Indicates if the user has set the network to be in private mode. Currently this
# prevents sending client identifying information over identify.
# network_private = false
# Disables the discovery protocol from starting.
# network_disable_discovery = false
#######################################################################
### UDP Discovery Config Options ###
#######################################################################
# The request timeout for each UDP request.
# discv5_request_timeout_secs = 5
# The timeout after which a `QueryPeer` in an ongoing query is marked unresponsive.
# Unresponsive peers don't count towards the parallelism limits for a query.
# Hence, we may potentially end up making more requests to good peers.
# discv5_query_peer_timeout_secs = 2
# The number of retries for each UDP request.
# discv5_request_retries = 1
# The number of peers to request in parallel in a single query.
# discv5_query_parallelism = 5
# Reports all discovered ENR's when traversing the DHT to the event stream.
# discv5_report_discovered_peers = false
# Disables the incoming packet filter.
# discv5_disable_packet_filter = false
# Disable to limit the number of IP addresses from the same
# /24 subnet in the kbuckets table. This is to mitigate eclipse attacks.
# discv5_disable_ip_limit = false
#######################################################################
### Log Sync Config Options ###
#######################################################################
# RPC endpoint to sync event logs on EVM compatible blockchain.
# blockchain_rpc_endpoint = "http://127.0.0.1:8545"
# Flow contract address to sync event logs.
log_contract_address = "0xbD2C3F0E65eDF5582141C35969d66e34629cC768"
# Block number to sync event logs from blockchain. Generally, this is
# the block number when flow contract deployed.
log_sync_start_block_number = 595059
# Number of blocks to confirm a transaction.
# confirmation_block_count = 3
# Maximum number of event logs to poll at a time.
# log_page_size = 999
# Maximum data size to cache in memory (by default, 100MB).
# max_cache_data_size = 104857600
# TTL to cache data in memory.
# cache_tx_seq_ttl = 500
# The number of retries after a RPC request times out.
# rate_limit_retries = 100
# The nubmer of retries for rate limited responses.
# timeout_retries = 100
# The duration to wait before retry, in ms.
# initial_backoff = 500
# The duration between each paginated getLogs RPC call, in ms.
# This is set to avoid triggering the throttling mechanism in the RPC server.
# recover_query_delay = 50
# The counter assumed the finalized block behind the latest block.
# default_finalized_block_count = 100
# Remove finalized block trigger interval.
# remove_finalized_block_interval_minutes = 30
# Watch_loop (eth_getLogs) trigger interval.
# watch_loop_wait_time_ms = 500
#######################################################################
### RPC Config Options ###
#######################################################################
# Whether to provide RPC service.
# rpc_enabled = true
# HTTP server address to bind for public RPC.
# rpc_listen_address = "0.0.0.0:5678"
# HTTP server address to bind for admin and debug RPC.
# rpc_listen_address_admin = "127.0.0.1:5679"
# Maximum data size of RPC request body (by default, 100MB).
# max_request_body_size = 104857600
# Number of chunks for a single segment.
# rpc_chunks_per_segment = 1024
# Maximum file size that allowed to cache in memory (by default, 10MB).
# rpc_max_cache_file_size = 10485760
#######################################################################
### Chunk Pool Config Options ###
#######################################################################
# Maximum number of threads to upload segments of a single file simultaneously.
# chunk_pool_write_window_size = 4
# Maximum data size of cached segment in pool (by default, 4MB).
# chunk_pool_max_cached_chunks_all = 4194304
# Maximum number of threads to upload segments for all files simultaneously.
# chunk_pool_max_writings = 16
# Expiration time to cache uploaded segments in memory.
# chunk_pool_expiration_time_secs = 300
#######################################################################
### DB Config Options ###
#######################################################################
# Directory to store data.
# db_dir = "db"
#######################################################################
### Misc Config Options ###
#######################################################################
# Log configuration file.
# log_config_file = "log_config"
# Log directory.
# log_directory = "log"
#######################################################################
### Mine Config Options ###
#######################################################################
# Mine contract address for incentive.
mine_contract_address = "0x6815F41019255e00D6F34aAB8397a6Af5b6D806f"
# Miner key is used to sign blockchain transaction for incentive.
# The value should be a hex string of length 64 without 0x prefix.
#
# Note, the corresponding address should have enough tokens to pay
# transaction gas fee.
# miner_key = ""
# Period for querying mine context on chain (in seconds)
#
# Note: During each query period, nodes will issue 3 `eth_call` requests.
# If your blockchain RPC endpoint is a public or priced node, please be
# cautious not to set the period too short.
#
# mine_context_query_seconds = 5
# CPU Usage percentage for PoRA mining. 100 means one CPU core is fully loaded.
#
# miner_cpu_percentage = 100
#######################################################################
### Sharding Config Options ###
#######################################################################
# The max number of chunk entries to store in db.
# Each entry is 256B, so the db size is roughly limited to
# `256 * db_max_num_sectors` Bytes.
# If this limit is reached, the node will update its `shard_position`
# and store only half data.
#
db_max_num_sectors = 1000000000
# The format is <shard_id>/<shard_number>, where the shard number is 2^n.
# This only applies if there is no stored shard config in db.
# shard_position = "0/2"
reward_contract_address = "0x51998C4d486F406a788B766d93510980ae1f9360"
# The time interval to check if we should half `shard_position` to prune data.
#
# prune_check_time_s = 60
# The number of chunk entries to delete in a batch when we prune data.
#
# prune_batch_size = 1024
# The time interval to wait between each prune batch deletion to avoid
# IO resource exhaustion.
#
# prune_batch_wait_time_ms = 1000
#######################################################################
### Network Peer DB Config Options ###
#######################################################################
# [network_peer_db]
# The maximum number of disconnected nodes to remember.
# max_disconnected_peers = 500
# The maximum number of banned nodes to remember.
# max_banned_peers = 1000
#######################################################################
### Router Config Options ###
#######################################################################
[router]
# Timeout to publish file announcements in batch.
# batcher_timeout = "1s"
# Number of files in an announcement to publish in batch.
batcher_file_capacity = 10
# Number of announcements in a pubsub message to publish in batch.
batcher_announcement_capacity = 100
#######################################################################
### File Sync Config Options ###
#######################################################################
[sync]
# Enable file sync among peers automatically. When enabled, each node will store
# all files, and sufficient disk space is required.
auto_sync_enabled = true
# Maximum number of files in sync from other peers simultaneously.
# max_sync_files = 32
# Enable to start a file sync via RPC (e.g. `admin_startSyncFile`).
# sync_file_by_rpc_enabled = true
# Maximum number of continous failures to terminate a file sync.
# max_request_failures = 5
# Timeout to dail peers.
# peer_connect_timeout = "15s"
# Timeout to disconnect peers.
# peer_disconnect_timeout = "15s"
# Timeout to find peers via FIND_FILE P2P pubsub message.
# peer_find_timeout = "120s"
# Timeout to download data from remote peer.
# peer_chunks_download_timeout = "15s"
# Maximum network bandwidth (B/s) to sync files. Default value is 0,
# which indicates no limitation.
# max_bandwidth_bytes = 0
# Maximum threads to sync files in sequence.
# max_sequential_workers = 0
# Maximum threads to sync files randomly.
# max_random_workers = 30
# Timeout to terminate a file sync in sequence.
# sequential_find_peer_timeout = "60s"
# Timeout to terminate a file sync randomly.
# random_find_peer_timeout = "500s"
#######################################################################
### File Location Cache Options ###
#######################################################################
# [file_location_cache]
# File location cache is a cache that maintains storage positions of files.
# Storage location information is represented by the IP address of the storage node and the timestamp indicating when the node declared that it stores the corresponding file.
# It has both a global capacity limit and a limit on the capacity for location information of each individual file.
# When the cache is full, the storage position information with oldest timestamp will be replaced.
# Global cache capacity.
# max_entries_total = 1000000
# Location information capacity for each file.
# max_entries_per_file = 4
# Validity period of location information.
# If the timestamp in the storage location information exceeds this duration from the current time, it will be removed from the cache.
# entry_expiration_time_secs = 86400
#######################################################################
### Metrics Options ###
#######################################################################
# [metrics]
# Whether to enable metrics.
# enabled = false
# Interval to output metrics periodically, e.g. "10s", "30s" or "60s".
# report_interval = ""
# File name to output metrics periodically.
# file_report_output = ""
# Influxdb configurations to output metrics periodically.
# influxdb_report_host = ""
# influxdb_report_db = ""
# influxdb_report_username = ""
# influxdb_report_password = ""
# Storage node name as a tag.
# influxdb_report_node = ""