better buffer instructions and other minor changes (#75)

* add git commit to Dockerfile label

* add deploy resource requirements

* add default stats collection

* fix file permissions

* relax buffer warning

* fix typos

* add various deploy instructions

DOCKER-README.md

@@ -3,39 +3,65 @@
 ## WARNING
 
 > [!WARNING]
-> Currently Docker cannot be used to run Quilibrium.
+> The Quilibrium docker container requires host configuration changes.
 
 There are extreme buffering requirements, especially during sync, and these in turn require `sysctl`
-configuration changes that unfortunately are not supported by Docker.
+configuration changes that unfortunately are not supported by Docker. But if these changes are made on
+the host machine, then luckily containers seem to automatically have the larger buffers.
 
 The buffer related `sysctl` settings are `net.core.rmem_max` and `net.core.wmem_max` and they both
 should be set to `600,000,000` bytes. This value allows pre-buffering of the entire maximum payload
 for sync.
 
+You can tell that the buffer size is not large enough by noticing this log entry at beginning when 
+Quilibrium starts, a few lines below the large logo:
+> failed to sufficiently increase receive buffer size (was: 208 kiB, wanted: 2048 kiB, got: 416 kiB).
+> See https://github.com/quic-go/quic-go/wiki/UDP-Buffer-Sizes for details.
+
 To read the currently set values:
 ```shell
 sysctl -n net.core.rmem_max
 sysctl -n net.core.wmem_max
 ```
 
-To set new values:
+To set new values, this is not a persistent change:
 ```shell
 sudo sysctl -w net.core.rmem_max=600000000
 sudo sysctl -w net.core.wmem_max=600000000
 ```
 
-## Build
+To persistently set the new values add a configuration file named `20-quilibrium.conf` to
+`/etc/sysctl.d/`. The file content should be:
+```
+# Quilibrium buffering requirements, especially during sync.
+# The value could be as low as 26214400, but everything would be slower.
 
-Build the docker image:
-```shell
-docker build -t quilibrium -t quilibrium:1.2.9 .
+net.core.rmem_max = 600000000
+net.core.wmem_max = 600000000
 ```
 
-Use latest version instead of `1.2.9`.
+
+## Build
+
+In the repository root folder, where the [Dockerfile](Dockerfile) file is, build the docker image:
+```shell
+docker build --build-arg GIT_COMMIT=$(git log -1 --format=%h) -t quilibrium -t quilibrium:1.2.15 .
+```
+
+Use latest version instead of `1.2.15`.
 
 
 ## Run
 
+You can run Quilibrium on the same machine where you built the image, from the same repository root
+folder where [docker-compose.yml](docker-compose.yml) is.
+
+You can also copy `docker-compose.yml` to a new folder on a server and run it there. In this case you
+have to have a way to push your image to a Docker image repo and then pull that image on the server.
+Github offers such an image repo and a way to push and pull images using special authentication
+tokens. See
+[Working with the Container registry](https://docs.github.com/en/packages/working-with-a-github-packages-registry/working-with-the-container-registry).
+
 Run Quilibrium in a container:
 ```shell
 docker compose up -d
@@ -45,7 +71,57 @@ A `.config/` subfolder will be created under the current folder, this is mapped
 Make sure you backup `config.yml` and `keys.yml`.
 
 
-## Intereact with a running cotainer
+### Resource management
+To ensure that your client performs optimally within a specific resource configuration, you can specify
+resource limits and reservations in the node configuration as illustrated below. 
+
+This configuration helps in deploying the client with controlled resource usage, such as CPU and memory,
+to avoid overconsumption of resources in your environment.
+
+The [docker-compose.yml](docker-compose.yml) file already specifies resources following the currently
+recommended hardware requirements.
+
+```yaml
+services:
+  node:
+    # Some other configuration sections here
+    deploy:
+      resources:
+        limits:
+          cpus: '4'  # Maximum CPU count that the container can use
+          memory: 16G  # Maximum memory that the container can use
+        reservations:
+          cpus: '2'  # CPU count that the container initially requests
+          memory: 8G  # Memory that the container initially request
+```
+
+
+### Customizing docker-compose.yml
+
+If you want to change certain parameters in [docker-compose.yml](docker-compose.yml) it is better not
+to edit the file directly as new versions pushed through git would overwrite your changes. A more
+flexible solution is to create another file called `docker-compose.override.yml` right next to it
+and specifying the necessary overriding changes there.
+
+For example:
+```yaml
+services:
+  node:
+    image: ghcr.io/mscurtescu/ceremonyclient
+    restart: on-failure:7
+```
+
+The above will override the image name and also the restart policy.
+
+To check if your overrides are being picked up run the following command:
+```shell
+docker compose config
+```
+
+This will output the merged and canonical compose file that will be used to run the container(s).
+
+
+## Interact with a running container
 
 Drop into a shell inside a running container:
 ```shell
@@ -62,7 +138,7 @@ Get the Peer ID:
 docker compose exec node go run ./... -peer-id
 ```
 
-Get the token ballance:
+Get the token balance:
 ```shell
 docker compose exec node go run ./... -balance
 ```

Dockerfile

@@ -1,10 +1,13 @@
 FROM golang:1.20.14-alpine3.19
 
+ARG GIT_COMMIT=unspecified
+
 LABEL org.opencontainers.image.title="Quilibrium Network Node"
 LABEL org.opencontainers.image.description="Quilibrium is a decentralized alternative to platform as a service providers."
 LABEL org.opencontainers.image.vendor=Quilibrium
 LABEL org.opencontainers.image.url=https://quilibrium.com/
 LABEL org.opencontainers.image.documentation=https://quilibrium.com/docs
+LABEL org.opencontainers.image.revision=$GIT_COMMIT
 
 ENV GOEXPERIMENT=arenas
 

docker-compose.yml

@@ -3,16 +3,24 @@ version: "3.8"
 name: quilibrium
 
 # See sysctl related warning in DOCKER-README.md.
-# Currently Docker cannot be used to run Quilibrium.
+# Host configuration changes are required.
 
 services:
   node:
     build: ./
     image: quilibrium
     restart: unless-stopped
+    deploy:
+      resources:
+        limits:
+          memory: 32G
+        reservations:
+          cpus: 12
+          memory: 16G
     environment:
       - DEFAULT_LISTEN_GRPC_MULTIADDR=/ip4/0.0.0.0/tcp/8337
       - DEFAULT_LISTEN_REST_MULTIADDR=/ip4/0.0.0.0/tcp/8338
+      - DEFAULT_STATS_MULTIADDR=/dns/stats.quilibrium.com/tcp/443
     ports:
       - '8336:8336/udp' # p2p
       - '127.0.0.1:8337:8337/tcp' # gRPC

node/config/config.go

@@ -142,6 +142,10 @@ func LoadConfig(configPath string, proverKey string) (*Config, error) {
 			config.ListenRestMultiaddr = os.Getenv("DEFAULT_LISTEN_REST_MULTIADDR")
 		}
 
+		if multiAddr := os.Getenv("DEFAULT_STATS_MULTIADDR"); multiAddr != "" {
+			config.Engine.StatsMultiaddr = multiAddr
+		}
+
 		fmt.Println("Saving config...")
 		if err = SaveConfig(configPath, config); err != nil {
 			panic(err)
@@ -150,7 +154,7 @@ func LoadConfig(configPath string, proverKey string) (*Config, error) {
 		keyfile, err := os.OpenFile(
 			filepath.Join(configPath, "keys.yml"),
 			os.O_CREATE|os.O_RDWR,
-			fs.FileMode(0700),
+			fs.FileMode(0600),
 		)
 		if err != nil {
 			panic(err)

node/main.go

@@ -202,7 +202,7 @@ func clearIfTestData(configDir string, nodeConfig *config.Config) {
 		versionFile, err := os.OpenFile(
 			filepath.Join(configDir, "RELEASE_VERSION"),
 			os.O_CREATE|os.O_RDWR,
-			fs.FileMode(0700),
+			fs.FileMode(0600),
 		)
 		if err != nil {
 			panic(err)
@@ -232,7 +232,7 @@ func migrate(configDir string, nodeConfig *config.Config) {
 		migrationFile, err := os.OpenFile(
 			filepath.Join(configDir, "MIGRATIONS"),
 			os.O_CREATE|os.O_RDWR,
-			fs.FileMode(0700),
+			fs.FileMode(0600),
 		)
 		if err != nil {
 			panic(err)