diff --git a/Nlbench_pro.sh b/Nlbench_pro.sh
deleted file mode 100644
index 122d930..0000000
--- a/Nlbench_pro.sh
+++ /dev/null
@@ -1,407 +0,0 @@
-#!/bin/bash
-
-# 定义版本
-VERSION="1.0.2"
-
-# 定义颜色
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-# 检查 root 权限并获取 sudo 权限
-if [ "$(id -u)" != "0" ]; then
-    echo "此脚本需要 root 权限运行。"
-    if ! sudo -v; then
-        echo "无法获取 sudo 权限，退出脚本。"
-        exit 1
-    fi
-    echo "已获取 sudo 权限。"
-fi
-
-# 检查并安装依赖
-install_dependencies() {
-    echo -e "${YELLOW}正在检查并安装必要的依赖项...${NC}"
-    
-    # 更新包列表
-    if ! sudo apt-get update; then
-        echo -e "${RED}无法更新包列表。请检查您的网络连接和系统设置。${NC}"
-        exit 1
-    fi
-    
-    # 安装依赖
-    local dependencies=(
-        "curl"
-        "wget"
-    )
-    
-    for dep in "${dependencies[@]}"; do
-        if ! command -v "$dep" &> /dev/null; then
-            echo -e "${YELLOW}正在安装 $dep...${NC}"
-            if ! sudo apt-get install -y "$dep"; then
-                echo -e "${RED}无法安装 $dep。请手动安装此依赖项。${NC}"
-            fi
-        else
-            echo -e "${GREEN}$dep 已安装。${NC}"
-        fi
-    done
-    
-    echo -e "${GREEN}依赖项检查和安装完成。${NC}"
-    clear
-}
-
-# 获取IP地址
-ip_address() {
-    ipv4_address=$(curl -s --max-time 5 ipv4.ip.sb)
-    if [ -z "$ipv4_address" ]; then
-        ipv4_address=$(ip -4 addr show | grep -oP '(?<=inet\s)\d+(\.\d+){3}' | grep -v '127.0.0.1' | head -n1)
-    fi
-
-    ipv6_address=$(curl -s --max-time 5 ipv6.ip.sb)
-    if [ -z "$ipv6_address" ]; then
-        ipv6_address=$(ip -6 addr show | grep -oP '(?<=inet6\s)[\da-f:]+' | grep -v '^::1' | grep -v '^fe80' | head -n1)
-    fi
-}
-
-# 检测VPS地理位置
-detect_region() {
-    local country
-    country=$(curl -s ipinfo.io/country)
-    case $country in
-        "TW") echo "1" ;;          # 台湾
-        "HK") echo "2" ;;          # 香港
-        "JP") echo "3" ;;          # 日本
-        "US" | "CA") echo "4" ;;   # 北美
-        "BR" | "AR" | "CL") echo "5" ;;  # 南美
-        "GB" | "DE" | "FR" | "NL" | "SE" | "NO" | "FI" | "DK" | "IT" | "ES" | "CH" | "AT" | "BE" | "IE" | "PT" | "GR" | "PL" | "CZ" | "HU" | "RO" | "BG" | "HR" | "SI" | "SK" | "LT" | "LV" | "EE") echo "6" ;;  # 欧洲
-        "AU" | "NZ") echo "7" ;;   # 大洋洲
-        "KR") echo "8" ;;          # 韩国
-        "SG" | "MY" | "TH" | "ID" | "PH" | "VN") echo "9" ;;  # 东南亚
-        "IN") echo "10" ;;         # 印度
-        "ZA" | "NG" | "EG" | "KE" | "MA" | "TN" | "GH" | "CI" | "SN" | "UG" | "ET" | "MZ" | "ZM" | "ZW" | "BW" | "MW" | "NA" | "RW" | "SD" | "DJ" | "CM" | "AO") echo "11" ;;  # 非洲
-        *) echo "0" ;;             # 跨国平台
-    esac
-}
-
-# 统计使用次数
-sum_run_times() {
-    local COUNT=$(wget --no-check-certificate -qO- --tries=2 --timeout=2 "https://hits.seeyoufarm.com/api/count/incr/badge.svg?url=https%3A%2F%2Fgithub.com%2Feverett7623%2Fnodeloc_vps_test%2Fmain%2FNlbench.sh" 2>&1 | grep -m1 -oE "[0-9]+[ ]+/[ ]+[0-9]+")
-    if [[ -n "$COUNT" ]]; then
-        daily_count=$(cut -d " " -f1 <<< "$COUNT")
-        total_count=$(cut -d " " -f3 <<< "$COUNT")
-    else
-        echo "Failed to fetch usage counts."
-        daily_count=0
-        total_count=0
-    fi
-}
-
-# 调用函数获取统计数据
-sum_run_times
-
-# 更新系统
-update_system() {
-    if command -v apt &>/dev/null; then
-        apt-get update && apt-get upgrade -y
-    elif command -v dnf &>/dev/null; then
-        dnf check-update && dnf upgrade -y
-    elif command -v yum &>/dev/null; then
-        yum check-update && yum upgrade -y
-    elif command -v apk &>/dev/null; then
-        apk update && apk upgrade
-    else
-        echo -e "${RED}不支持的Linux发行版${NC}"
-        return 1
-    fi
-    return 0
-}
-
-# 执行单个脚本并输出结果到文件
-run_script() {
-    local script_number=$1
-    local output_file=$2
-    local temp_file=$(mktemp)
-    case $script_number in
-        # YABS
-        1)
-            echo -e "运行${YELLOW}YABS...${NC}"
-            wget -qO- yabs.sh | bash | tee "$temp_file"
-            sed -i 's/\x1B\[[0-9;]*[JKmsu]//g' "$temp_file"
-            sed -i 's/\.\.\./\.\.\.\n/g' "$temp_file"
-            sed -i '/\.\.\./d' "$temp_file"
-            sed -i '/^\s*$/d'   "$temp_file"
-            cp "$temp_file" "${output_file}_yabs"
-            ;;
-        # 融合怪
-        2)
-            echo -e "运行${YELLOW}融合怪...${NC}"
-            curl -L https://gitlab.com/spiritysdx/za/-/raw/main/ecs.sh -o ecs.sh && chmod +x ecs.sh && bash ecs.sh -m 1 <<< "y" | tee "$temp_file"
-            sed -i 's/\x1B\[[0-9;]*[JKmsu]//g' "$temp_file"
-            sed -i 's/\.\.\.\.\.\./\.\.\.\.\.\.\n/g' "$temp_file"
-            sed -i '1,/\.\.\.\.\.\./d' "$temp_file"
-            sed -i '1,/\.\.\.\.\.\./d' "$temp_file"
-            cp "$temp_file" "${output_file}_fusion"
-            ;;
-        # IP质量
-        3)
-            echo -e "运行${YELLOW}IP质量测试...${NC}"
-            
-            bash <(curl -Ls IP.Check.Place) | tee "$temp_file"
-            sed  's/\x1B\[[0-9;]*[JKmsu]//g; /\.\.\.\.\.\.\.\.\.\./d'  "$temp_file"  > "${output_file}_ip_quality"
-            ;;
-        # 流媒体解锁
-        4)
-            echo -e "运行${YELLOW}流媒体解锁测试...${NC}"
-            local region=$(detect_region)
-            bash <(curl -L -s media.ispvps.com) <<< "$region" |tee "$temp_file" 
-            sed 's/\x1B\[[0-9;]*[JKmsu]//g; 1,/脚本适配/d' "$temp_file" > "${output_file}_streaming"
-            ;;
-        # 响应测试
-        5)
-            echo -e "运行${YELLOW}响应测试...${NC}"
-            bash <(curl -sL https://nodebench.mereith.com/scripts/curltime.sh) |tee "$temp_file"
-            sed 's/\x1B\[[0-9;]*[JKmsu]//g' "$temp_file" > "${output_file}_response"
-            ;;
-        # 多线程测速
-        6)
-            echo -e "运行${YELLOW}多线程测速...${NC}"
-            bash <(curl -sL bash.icu/speedtest) <<< "1" |tee "$temp_file"
-            sed -r -i 's/\x1B\[[0-9;]*[JKmsu]//g' "$temp_file"
-            sed -i -r '1,/序号\:/d' "$temp_file"
-            sed -i -r 's/(⠋|⠙|⠹|⠸|⠼|⠴|⠦|⠧|⠇|⠏)/\n/g' "$temp_file"
-            sed -i -r '/测试进行中/d' "$temp_file"
-            cp "$temp_file" "${output_file}_multi_thread"
-            ;;
-        # 单线程测速
-        7)
-            echo -e "运行${YELLOW}单线程测速...${NC}"
-            bash <(curl -sL bash.icu/speedtest) <<< "2" |tee "$temp_file"
-            sed -r -i 's/\x1B\[[0-9;]*[JKmsu]//g' "$temp_file"
-            sed -i -r '1,/序号\:/d' "$temp_file"
-            sed -i -r 's/(⠋|⠙|⠹|⠸|⠼|⠴|⠦|⠧|⠇|⠏)/\n/g' "$temp_file"
-            sed -i -r '/测试进行中/d' "$temp_file"
-            cp "$temp_file" "${output_file}_single_thread"
-            ;;
-        # 回程路由
-        8)
-            echo -e "运行${YELLOW}回程路由测试...${NC}"
-            wget -N --no-check-certificate https://raw.githubusercontent.com/Chennhaoo/Shell_Bash/master/AutoTrace.sh && chmod +x AutoTrace.sh && bash AutoTrace.sh <<< "1" |tee "$temp_file"
-            sed -e 's/\x1B\[[0-9;]*[JKmsu]//g' -e ' /测试项/,+9d'  -e '/信息/d'  -e '/^\s*$/d' "$temp_file" > "${output_file}_route"
-            ;;
-    esac
-    rm "$temp_file"
-    echo -e "${GREEN}测试完成。${NC}"
-}
-
-# 生成最终的 Markdown 输出
-generate_markdown_output() {
-    local base_output_file=$1
-    local final_output_file="${base_output_file}.md"
-
-    echo "[tabs]" > "$final_output_file"
-
-    echo "[tab=\"YABS\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    if [ -f "${base_output_file}_yabs" ]; then
-        cat "${base_output_file}_yabs" >> "$final_output_file"
-        rm "${base_output_file}_yabs"
-    fi
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"融合怪\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    if [ -f "${base_output_file}_fusion" ]; then
-        cat "${base_output_file}_fusion" >> "$final_output_file"
-        rm "${base_output_file}_fusion"
-    fi
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"IP质量\"]" >> "$final_output_file"
-    if [ -f "${base_output_file}_ip_quality" ]; then
-        cat "${base_output_file}_ip_quality" >> "$final_output_file"
-        rm "${base_output_file}_ip_quality"
-    fi
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"流媒体\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    if [ -f "${base_output_file}_streaming" ]; then
-        cat "${base_output_file}_streaming" >> "$final_output_file"
-        rm "${base_output_file}_streaming"
-    fi
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"响应\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    if [ -f "${base_output_file}_response" ]; then
-        cat "${base_output_file}_response" >> "$final_output_file"
-        rm "${base_output_file}_response"
-    fi
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"多线程测速\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    if [ -f "${base_output_file}_multi_thread" ]; then
-        cat "${base_output_file}_multi_thread" >> "$final_output_file"
-        rm "${base_output_file}_multi_thread"
-    fi
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"单线程测速\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    if [ -f "${base_output_file}_single_thread" ]; then
-        cat "${base_output_file}_single_thread" >> "$final_output_file"
-        rm "${base_output_file}_single_thread"
-    fi
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"回程路由\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    if [ -f "${base_output_file}_route" ]; then
-        cat "${base_output_file}_route" >> "$final_output_file"
-        rm "${base_output_file}_route"
-    fi
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"去程路由\"]" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"iperf3\"]" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    echo "\`\`\`" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"Ping.pe\"]" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"哪吒 ICMP\"]" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[tab=\"其他\"]" >> "$final_output_file"
-    echo "[/tab]" >> "$final_output_file"
-
-    echo "[/tabs]" >> "$final_output_file"
-
-    echo "所有测试完成，结果已保存在 $final_output_file 中。"
-    read -p "按回车键继续..."
-    clear
-}
-
-# 执行全部脚本
-run_all_scripts() {
-    local base_output_file="NLvps_results_$(date +%Y%m%d_%H%M%S)"
-    echo "开始执行全部测试脚本..."
-    for i in {1..8}; do
-        run_script $i "$base_output_file"
-    done
-    generate_markdown_output "$base_output_file"
-    clear
-}
-
-# 执行选定的脚本
-run_selected_scripts() {
-    clear
-    local base_output_file="NLvps_results_$(date +%Y%m%d_%H%M%S)"
-    echo -e "${YELLOW}Nodeloc VPS 自动测试脚本 $VERSION${NC}"
-    echo "1. Yabs"
-    echo "2. 融合怪"
-    echo "3. IP质量"
-    echo "4. 流媒体解锁"
-    echo "5. 响应测试"
-    echo "6. 多线程测试"
-    echo "7. 单线程测试"
-    echo "8. 回程路由"
-    echo "0. 返回"
-    read -p "请输入要执行的脚本编号（用逗号分隔，例如：1,2,3):" script_numbers
-    IFS=',' read -ra selected_scripts <<< "$script_numbers"
-    echo "开始执行选定的测试脚本..."
-    if [ $script_numbers == "0" ]
-    then
-        clear
-        show_welcome
-    else
-        for number in "${selected_scripts[@]}"; do
-            clear
-            run_script "$number" "$base_output_file"
-        done
-        generate_markdown_output "$base_output_file"
-    fi
-}
-
-# 主菜单
-main_menu() {
-    echo -e "${YELLOW}Nodeloc VPS 自动测试脚本 $VERSION${NC}"
-    echo -e "${GREEN}测试项目：${NC}Yabs，融合怪，IP质量，流媒体解锁，响应测试，多线程测试，单线程测试，回程路由。"
-    echo -e "${YELLOW}1. 执行所有测试脚本${NC}"
-    echo -e "${YELLOW}2. 选择特定测试脚本${NC}"
-    echo -e "${YELLOW}0. 退出${NC}"
-    read -p "请选择操作 [0-2]: " choice
-
-    case $choice in
-        1)
-            run_all_scripts
-            ;;
-        2)
-            run_selected_scripts
-            ;;
-        0)
-            echo -e "${RED}感谢使用NodeLoc聚合测试脚本，已退出脚本，期待你的下次使用！${NC}"
-            exit 0
-            ;;
-        *)
-            echo -e "${RED}无效选择，请重新输入。${NC}"
-            sleep 3s
-            clear
-            show_welcome
-            ;;
-    esac
-}
-
-# 输出欢迎信息
-show_welcome() {
-    echo ""
-    echo -e "${RED}---------------------------------By'Jensfrank---------------------------------${NC}"
-    echo ""
-    echo "Nodeloc_VPS_自动脚本测试 $VERSION"
-    echo "GitHub地址: https://github.com/everett7623/nodeloc_vps_test"
-    echo "VPS选购: https://www.nodeloc.com/vps"
-    echo ""
-    echo -e "${YELLOW}#     #  #####  ####  ###### #       ####   ####    #    # ####   ####${NC}"
-    echo -e "${YELLOW}##    # #     # #   # #      #      #    # #    #   #    # #   # #     #${NC}"
-    echo -e "${YELLOW}# #   # #     # #   # #####  #      #    # #        #    # ####   ####${NC}"
-    echo -e "${YELLOW}#  #  # #     # #   # #      #      #    # #        #    # #          #${NC}"
-    echo -e "${YELLOW}#   # # #     # #   # #      #      #    # #    #   #    # #     #    #${NC}"
-    echo -e "${YELLOW}#    ##  #####  ####  ###### ######  ####   ####     ####  #      ####${NC}"
-    echo ""
-    echo "支持Ubuntu/Debian"
-    echo ""
-    echo -e "今日运行次数: ${RED}$daily_count${NC} 次，累计运行次数: ${RED}$total_count${NC} 次"
-    echo ""
-    echo -e "${RED}---------------------------------By'Jensfrank---------------------------------${NC}"
-    echo ""
-}
-
-# 主函数
-main() {
-    # 检查并安装依赖
-    install_dependencies
-
-    # 获取统计数据
-    sum_run_times
-
-    # 主循环
-    while true; do
-        show_welcome
-        main_menu
-    done
-}
-
-# 运行主函数
-main