Update README.md

Nlbench.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # 定义版本
-CURRENT_VERSION="2024-08-08 v1.1.1" # 最新版本号
+CURRENT_VERSION="2024-08-13 v1.1.2" # 最新版本号
 SCRIPT_URL="https://raw.githubusercontent.com/everett7623/nodeloc_vps_test/main/Nlbench.sh"
 VERSION_URL="https://raw.githubusercontent.com/everett7623/nodeloc_vps_test/main/version.sh"
 
@@ -427,7 +427,6 @@ run_script() {
             echo "使用IPv4测试选项"
             wget -N --no-check-certificate https://raw.githubusercontent.com/Chennhaoo/Shell_Bash/master/AutoTrace.sh && chmod +x AutoTrace.sh && bash AutoTrace.sh <<< "1" | tee "$temp_file"
             fi
-//            sed -i -e 's/\x1B\[[0-9;]*[JKmsu]//g' -e '/测试项/,+9d' -e '/信息/d' -e '/^\s*$/d' "$temp_file"
             sed -i -e 's/\x1B\[[0-9;]*[JKmsu]//g' -e '/No:1\/9 Traceroute to/,$!d' -e '/测试项/,+9d' -e '/信息/d' -e '/^\s*$/d' "$temp_file"
             cp "$temp_file" "${output_file}_route"
             ;;
@@ -442,24 +441,25 @@ generate_markdown_output() {
     local final_output_file="${base_output_file}.md"
     local sections=("YABS" "Geekbench5" "融合怪" "IP质量" "流媒体" "响应" "多线程测速" "单线程测速" "iperf3" "回程路由")
     local file_suffixes=("yabs" "gb5" "fusion" "ip_quality" "streaming" "response" "multi_thread" "single_thread" "iperf3" "route")
+    local empty_tabs=("去程路由" "Ping.pe" "哪吒 ICMP" "其他")
 
     echo "[tabs]" > "$final_output_file"
 
+    # 输出有内容的标签
     for i in "${!sections[@]}"; do
         section="${sections[$i]}"
         suffix="${file_suffixes[$i]}"
+        if [ -f "${base_output_file}_${suffix}" ]; then
             echo "[tab=\"$section\"]" >> "$final_output_file"
             echo "\`\`\`" >> "$final_output_file"
-        if [ -f "${base_output_file}_${suffix}" ]; then
             cat "${base_output_file}_${suffix}" >> "$final_output_file"
-            rm "${base_output_file}_${suffix}"
-        fi
             echo "\`\`\`" >> "$final_output_file"
             echo "[/tab]" >> "$final_output_file"
+            rm "${base_output_file}_${suffix}"
+        fi
     done
 
-    # Adding remaining empty tabs
-    local empty_tabs=("去程路由" "Ping.pe" "哪吒 ICMP" "其他")
+    # 添加保留的空白标签
     for tab in "${empty_tabs[@]}"; do
         echo "[tab=\"$tab\"]" >> "$final_output_file"
         echo "[/tab]" >> "$final_output_file"

Nlbench_beta.sh

@@ -113,10 +113,17 @@ detect_os() {
         . /etc/lsb-release
         os_type=$DISTRIB_ID
         os_version=$DISTRIB_RELEASE
+    elif [ -f /etc/redhat-release ]; then
+        os_type=$(cat /etc/redhat-release | cut -d ' ' -f 1)
+        os_version=$(cat /etc/redhat-release | sed 's/.*release \([0-9\.]*\).*/\1/')
+    elif [ -f /etc/gentoo-release ]; then
+        os_type="gentoo"
+        os_version=$(cat /etc/gentoo-release | cut -d ' ' -f 5)
     else
-        echo -e "${RED}无法检测操作系统类型和版本。${NC}"
-        return 1
+        os_type=$(uname -s)
+        os_version=$(uname -r)
     fi
+    os_type=$(echo "$os_type" | tr '[:upper:]' '[:lower:]')
     echo -e "${YELLOW}检测到的系统: $os_type $os_version${NC}"
 }
 
@@ -124,15 +131,14 @@ detect_os() {
 update_system() {
     detect_os || return 1
 
-    # 根据操作系统类型选择更新命令
     case "${os_type,,}" in
         ubuntu|debian|linuxmint|elementary|pop)
             update_cmd="apt-get update"
             upgrade_cmd="apt-get upgrade -y"
             install_cmd="apt-get install -y"
             ;;
-        fedora|centos|rhel|ol|rocky|almalinux)
-            if [ "${os_version%%.*}" -ge 22 ] || [ "${os_version%%.*}" -ge 8 ]; then
+        centos|rhel|fedora|rocky|almalinux|openeuler)
+            if command -v dnf &>/dev/null; then
                 update_cmd="dnf check-update"
                 upgrade_cmd="dnf upgrade -y"
                 install_cmd="dnf install -y"
@@ -157,6 +163,16 @@ update_system() {
             upgrade_cmd="apk upgrade"
             install_cmd="apk add"
             ;;
+        gentoo)
+            update_cmd="emerge --sync"
+            upgrade_cmd="emerge -uDN @world"
+            install_cmd="emerge"
+            ;;
+        cloudlinux)
+            update_cmd="yum check-update"
+            upgrade_cmd="yum upgrade -y"
+            install_cmd="yum install -y"
+            ;;
         *)
             echo -e "${RED}不支持的 Linux 发行版: $os_type${NC}"
             return 1
@@ -189,6 +205,20 @@ install_dependencies() {
     # 安装依赖
     local dependencies=("curl" "wget" "iperf3")
     
+    case "${os_type,,}" in
+        gentoo)
+            for dep in "${dependencies[@]}"; do
+                if ! emerge -p $dep &>/dev/null; then
+                    echo -e "${YELLOW}正在安装 $dep...${NC}"
+                    if ! sudo emerge $dep; then
+                        echo -e "${RED}无法安装 $dep。请手动安装此依赖项。${NC}"
+                    fi
+                else
+                    echo -e "${GREEN}$dep 已安装。${NC}"
+                fi
+            done
+            ;;
+        *)
             for dep in "${dependencies[@]}"; do
                 if ! command -v "$dep" &> /dev/null; then
                     echo -e "${YELLOW}正在安装 $dep...${NC}"
@@ -199,6 +229,8 @@ install_dependencies() {
                     echo -e "${GREEN}$dep 已安装。${NC}"
                 fi
             done
+            ;;
+    esac
     
     echo -e "${GREEN}依赖项检查和安装完成。${NC}"
     clear
@@ -298,7 +330,7 @@ run_script() {
         # YABS
         1)
             echo -e "运行${YELLOW}YABS...${NC}"
-            curl -sL yabs.sh | bash -s -- -i -5 -6 | tee "$temp_file"
+            curl -sL yabs.sh | bash -s -- -i -5 | tee "$temp_file"
             sed -i 's/\x1B\[[0-9;]*[JKmsu]//g' "$temp_file"
             sed -i 's/\.\.\./\.\.\.\n/g' "$temp_file"
             sed -i '/\.\.\./d' "$temp_file"
@@ -348,7 +380,7 @@ run_script() {
         # IP质量
         4)
             echo -e "运行${YELLOW}IP质量测试...${NC}"
-            bash <(curl -Ls IP.Check.Place) | tee "$temp_file"
+            echo y | bash <(curl -Ls IP.Check.Place) | tee "$temp_file"
             sed -i 's/\x1B\[[0-9;]*[JKmsu]//g' "$temp_file"
             sed -i -r 's/(⠋|⠙|⠹|⠸|⠼|⠴|⠦|⠧|⠇|⠏)/\n/g' "$temp_file"
             sed -i -r '/正在检测/d' "$temp_file"
@@ -427,7 +459,7 @@ run_script() {
             echo "使用IPv4测试选项"
             wget -N --no-check-certificate https://raw.githubusercontent.com/Chennhaoo/Shell_Bash/master/AutoTrace.sh && chmod +x AutoTrace.sh && bash AutoTrace.sh <<< "1" | tee "$temp_file"
             fi
-            sed -i -e 's/\x1B\[[0-9;]*[JKmsu]//g' -e '/测试项/,+9d' -e '/信息/d' -e '/^\s*$/d' "$temp_file"
+            sed -i -e 's/\x1B\[[0-9;]*[JKmsu]//g' -e '/No:1\/9 Traceroute to/,$!d' -e '/测试项/,+9d' -e '/信息/d' -e '/^\s*$/d' "$temp_file"
             cp "$temp_file" "${output_file}_route"
             ;;
     esac
@@ -441,24 +473,25 @@ generate_markdown_output() {
     local final_output_file="${base_output_file}.md"
     local sections=("YABS" "Geekbench5" "融合怪" "IP质量" "流媒体" "响应" "多线程测速" "单线程测速" "iperf3" "回程路由")
     local file_suffixes=("yabs" "gb5" "fusion" "ip_quality" "streaming" "response" "multi_thread" "single_thread" "iperf3" "route")
+    local empty_tabs=("去程路由" "Ping.pe" "哪吒 ICMP" "其他")
 
     echo "[tabs]" > "$final_output_file"
 
+    # 输出有内容的标签
     for i in "${!sections[@]}"; do
         section="${sections[$i]}"
         suffix="${file_suffixes[$i]}"
+        if [ -f "${base_output_file}_${suffix}" ]; then
             echo "[tab=\"$section\"]" >> "$final_output_file"
             echo "\`\`\`" >> "$final_output_file"
-        if [ -f "${base_output_file}_${suffix}" ]; then
             cat "${base_output_file}_${suffix}" >> "$final_output_file"
-            rm "${base_output_file}_${suffix}"
-        fi
             echo "\`\`\`" >> "$final_output_file"
             echo "[/tab]" >> "$final_output_file"
+            rm "${base_output_file}_${suffix}"
+        fi
     done
 
-    # Adding remaining empty tabs
-    local empty_tabs=("去程路由" "Ping.pe" "哪吒 ICMP" "其他")
+    # 添加保留的空白标签
     for tab in "${empty_tabs[@]}"; do
         echo "[tab=\"$tab\"]" >> "$final_output_file"
         echo "[/tab]" >> "$final_output_file"
@@ -471,6 +504,7 @@ generate_markdown_output() {
     clear
 }
 
+
 # 执行全部脚本
 run_all_scripts() {
     local base_output_file="NLvps_results_$(date +%Y%m%d_%H%M%S)"

README.md

@@ -11,7 +11,13 @@
 ### 使用方法
 确保用户为ROOT，主机网络通畅，复制下面任意命令运行
 
-**支持Debian/Ubuntu/Deepin，不支持CentOS**
+**支持CentOS/Debian/Ubuntu/Deepin**
+
+CentOS
+```bash
+yum install wget&&wget -O Nlbench.sh https://raw.githubusercontent.com/everett7623/nodeloc_vps_test/main/Nlbench.sh && chmod +x Nlbench.sh && ./Nlbench.sh
+```
+Debian/Ubuntu/Deepin
 ```bash
 wget -O Nlbench.sh https://raw.githubusercontent.com/everett7623/nodeloc_vps_test/main/Nlbench.sh && chmod +x Nlbench.sh && ./Nlbench.sh
 ```

version.sh

@@ -14,3 +14,4 @@
 # 2024-07-29 v1.0.9 - 增加依赖安装
 # 2024-07-31 v1.1.0 - 去除yabs的gb6测试，替换iperf3服务端vps
 # 2024-08-08 v1.1.1 - 去除回程路由的ip等信息。
+# 2024-08-13 v1.1.2 - 优化tab标签。